☎Call Us for VIN-Verified Fitment & the Best Price —Call Us for VIN-Verified Fitment on +1 845 595 9822 · 7 Days a Week

Bentley Arnage Red Label & Green Label Brake Accumulator PC29626PA

Bentley Arnage Red Label and Green Label brake accumulator PC29626PA

Brand Name : Bentley

Part Number : PC29626PA

Condition : New

Availability : In Stock

Price :$ 690.00

Select Quantity :  


Refer to Friend Print

Product Details & Fitment

Bentley Arnage Red Label & Green Label brake accumulator with sealing ring, part number PC29626PA, for 1998 to 2001 models, also fitting the Rolls-Royce Silver Seraph and Park Ward.

The PC29626PA brake accumulator, supplied with its sealing ring, stores pressurized hydraulic fluid for the brake system on the Bentley Arnage Red Label and Green Label and the Rolls-Royce Silver Seraph. It keeps braking pressure on hand at all times, so the pedal stays firm and consistent from the first stop of the day to the last.

PC29626PA fits the Bentley Arnage Red Label, Bentley Arnage Green Label and Rolls-Royce Silver Seraph built from 1998 to 2001, as well as the Rolls-Royce Park Ward.

The brakes on these cars are powered by a hydraulic pump. The accumulator holds fluid under nitrogen gas pressure and releases it whenever demand is higher than the pump can supply on its own, such as in stop-and-go traffic or a hard stop. As the nitrogen charge weakens with age, the accumulator holds less and less pressure, and the pump has to work much harder to keep up.

The most common signs of a worn accumulator are a brake pressure warning light that stays on longer than usual after starting, or flickers on during repeated braking, and a hard, unresponsive pedal. A simple test is to switch the engine off and count the pedal presses before the pedal goes hard. A healthy system gives around 40 to 50 presses, while 10 to 15 means the accumulator needs replacing.

Accumulators are best replaced together, because the second one is usually close behind the first. Most of the cost of the job is labor, so renew the seals and O-rings at the same time. If the car has been in storage, test the accumulators before driving in heavy traffic, since they can deteriorate faster when a car sits unused.

Send us your VIN before ordering and we will confirm PC29626PA is the correct accumulator for your car.

Customer Reviews





Speak with a specialist +1 845 595 9822