Product Details & Fitment
Part number 3Z0612301 is the brake accumulator assembly for the Bentley Arnage R, Arnage T and Arnage RL, the Bentley Azure and the Bentley Brooklands. It replaces the earlier part number PC102802PA, which is no longer made.
3Z0612301 fits the Bentley Arnage R, Arnage T and Arnage RL built from 2002 onward, the Bentley Azure built from 2006 to 2010, and the Bentley Brooklands coupe.
On these cars a hydraulic pump builds the pressure that powers the brakes, and the accumulator stores a reserve of that pressure in a nitrogen-charged chamber. Whenever braking demand rises faster than the pump can respond, during heavy traffic or a sudden stop, the stored pressure fills the gap and the pedal keeps the same solid feel.
Over time the nitrogen charge leaks away and the accumulator stores less pressure with every year. Typical signs are a brake warning light that is slow to go out after the engine starts, a light that comes on during repeated stops, a pedal that feels hard and needs more effort, and a pump that has to run longer to keep pressure up. With the engine off, a healthy system gives dozens of firm presses before the pedal goes hard; if it goes hard after only 10 to 15, the accumulator is due.
The brake system holds high pressure even with the engine off, so release the pressure following the workshop manual before removing the old accumulator, then bleed the system once the new one is in. Fitting new seals at the same time avoids a second visit for a small leak.
Send us your VIN before ordering and we will confirm 3Z0612301 is the correct accumulator for your car.






