☎Call Us for VIN-Verified Fitment & the Best Price —Call Us for VIN-Verified Fitment on +1 845 595 9822 · 7 Days a Week

Bentley Arnage, Azure, Brooklands & Rolls-Royce Silver Seraph Sensors 1998–2010

Engine sensors for the Bentley Arnage, Bentley Azure, Bentley Brooklands and Rolls-Royce Silver Seraph built from 1998 to 2010, including lambda oxygen sensors, camshaft and crankshaft position sensors, oil level sensors and temperature sensors. The correct sensor depends on the engine in your car, since the BMW-built engines of the Arnage Green Label and Silver Seraph use different sensors from the 6.75 liter V8 of the Arnage Red Label, T, R, RL, Azure and Brooklands.

Lambda Oxygen Sensors

Lambda sensors measure the oxygen left in the exhaust so the engine management system can keep the fuel mixture correct. The sensors ahead of the catalytic converters control the fueling for each bank of the engine, while the sensors after the converters monitor how well the catalysts are working. A slow or failed lambda sensor causes a check engine light, higher fuel consumption, rough idle and failed emissions tests, and a sensor running too rich for long periods can damage the catalytic converters.

Camshaft and Crankshaft Position Sensors

The camshaft and crankshaft position sensors tell the engine management system where the engine is in its cycle, so it can time the ignition and fuel injection. When one of these sensors fails, the usual signs are a no-start or a long crank before the engine fires, stalling when hot, misfires, rough running and a check engine light. A sensor that fails only when warm is a common cause of intermittent stalling on these cars.

Oil Level and Temperature Sensors

The oil level sensor sends the reading for the low oil warning on the instrument panel, and temperature sensors report coolant and oil temperature to the gauges and the engine management system. A faulty oil level sensor gives false low oil warnings or no warning at all, so always check the dipstick before replacing it. A failed coolant temperature sensor can cause hard starting, poor fuel economy, incorrect gauge readings and cooling fans that run at the wrong time.

Ordering the Right Sensor

Many sensors look alike but differ in connector, thread size and signal range between engine families and model years, and the same sensor position can take a different part on each bank of the engine. We confirm the correct sensor against your VIN before your order ships, and if you have the part number from the old sensor, send it to us and we will match it.

Call us on +1 845 595 9822 seven days a week, 7am to 8pm, message us on WhatsApp, or email joe@exoticcarparts.com with your VIN, and we will confirm the correct sensor for your Bentley Arnage, Azure, Brooklands or Rolls-Royce Silver Seraph before your order ships.

Speak with a specialist +1 845 595 9822