Bentley Mulsanne Electronic Parking Brake (EPB) Motor 3Y0698996

Restore the safety and reliability of your Bentley’s handbrake system with this Genuine EPB Actuator Motor. The Mulsanne utilizes a sophisticated electronic parking brake system that requires precise motor calibration to maintain holding force on steep inclines. This motor (3Y0698996) is a direct-fit replacement for the rear brake calipers.

Constructed with an IP-rated weather-sealed housing, this motor is engineered to resist the road salt, moisture, and debris that typically cause aftermarket units to seize or crack. As a factory-original component, it ensures flawless communication with the Parking Brake Control Module, preventing "Parking Brake Fault" dashboard errors.

Vehicle Fitment & Compatibility:

• Bentley Mulsanne: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
• Fits: Left and Right rear calipers (Universal per side).
• Note: Does not fit Continental GT or Flying Spur models (which use the 3W prefix).

Part Number Reference:

• Current Part Number: 3Y0698996
• Related / Superseded Numbers: 3Y0 698 996, 3Y0698996A
• Connector Type: 2-Pin electrical interface.

Pro Tech Tip: When your Mulsanne displays a "Parking Brake Fault" or you hear a loud grinding noise from the rear wheels, the internal gears of the 3Y0698996 have likely failed. Mandatory: You must use a diagnostic tool to place the braking system into "Service Mode" before removing the old motor. Failure to do so can cause the piston to over-extend, damaging the caliper housing. We recommend inspecting the electrical harness plug for corrosion during installation, as a poor connection is the #1 cause of new motor failure.